The X65 MULTI has a resistance transformer (UNUN) with a ratio of 9:1 at the feed point. It reduces the extremely high impedance of a short wire to a range that can be matched with a normal tuner. The X65MULTI is then connected with coax to the tuner, the SWR on this line is usually below 3:1, and losses are low.
The X65MULTI is built to be low visual impact and suitable to fit most small garden plots and of course is perfect for those portable expeditions. The X65MULTI has a radiating wire length of 65 feet (19.8m) and covers 80m thru to 10m + all warc bands (TUNER REQUIRED AT THE TX END), the max power is 150 watts pep.
For short-wave listeners the X65MULTI is an ideal antenna, a simple wire connected to a receiver is very badly matched, resulting in only mediocre efficiency. With the X65MULTI the match is greatly improved, an additional matching unit is not required.
The X65MULTI is individually hand built to a very high standard using quality components, and is always tested for efficiency and quality. The X65MULTI can be pole mounted or attached to the side of a building, the antenna  can be inverted or fully horizontal or even doglegged to accommodate most qth’s.

 

Specs:
Bands: 80m thru 10m with tuner. Will tune on 160m but with limited efficiency.
Power: 150 watts pep
Wire: 65 feet (19.8m) can be shortened to 24 feet (7.13m) with a drop in efficiency.
Dimensions: 86L / 40W / 60H (in mm)

What’s in this package:
1x boxed transformer
1x 65 feet (19.8m) single wire
1x PVC Insulator
All fittings required to mount on pole and attach wire.
Full installation instruction and ideas guide.

 

Retail price: £38.00 + £5.00 p&p    NOW £30.00